Cooling tower PVC fill combines properties related to a media's ability to allow substances to migrate through it, while maintaining thermal efficiency-this then allows for the use of cooling tower film fill where fouling risks occur.

About our cooling tower fills types, we have Marley cooling tower fill, BAC cooling tower fill, Spindle cooling tower fill, Kuken cooling tower fill, Oblique wave cooling tower fill etc for your choices. 

Each module consists of vertically channeled flat and corrugated surfaces, which essentially avoids contact between the cooling tower fill sheets, thus eliminating water concentration. The horizontal corrugations and their location within the sheet promote optimum mixing of air and water. The flutes in this cooling tower fill are vertically and aerodynamically shaped resulting in a reduction of pressure drop. 

The raw material, such as PVC sheet material, will also influence the service time of cooling tower PVC fill materials. We always choose the new raw material for producing the cooling tower fill, this will add the lifetime for the cooling tower PVC fill  material.

Technical data for the Cunter Flow Cooling Tower Fills:
1. Material: PVC;
2. Allowed TSS with good microbiological control: ≤ 100 ppm;
3. Allowed TSS with poor microbiological control: ≤ 25 ppm;
4. Sheet pitch: 19mm;
5. Typical width: 305mm, 610mm;
6. Typical height: 305mm, 610mm, 915mm, 1220mm;
7. Length: 1220mm, 2400mm or customized;

We're a team of independent cooling tower engineers, our management team has more than 30 years of combined experience in the industry and is committed to providing quality materials, expertise and first-class service to the customers at a reasonable price.

We are a one-stop shop for all parts of wet cooling towers, if you have an existing cooling tower manufactured by Evapco, Marley, BAC, Davenport, Hamon, Film, Balcke Duerr, Carter, Visco, Watertech, Cooltech, Head Wrightson, Foster Wheeler HTI, Searl or another manufacturer we are able to help. Whether your cooling tower is small or large, constructed from steel, timber, concrete, fibre glass or plastic we can provide any parts no matter what type of cooling tower you have. We service a wide variety of clients and agents across the UK, Germany, Indonesia, Korea, Dubai, Malaysia, Singapore, Philippines, Spain, the USA, Australia, Vietnam, South Africa, India and worldwide; With the experience and the know-how of our engineers we plan and realize mostly tailormade solutions, which can be accurately adapted to the requirements and care of the oversea customers when they are purchasing in China.