Introduction of film fill: 

Cooling Tower PVC Fill also called cooling tower infill film media. It is one of the most important components in cooling tower. It’s function is increase the exchange area of the gas and working fluid in order to achieve the requested cooling requirement. The working fluid was distributed onto the cooling tower PVC fill and spread into a thin film uniformly, by increasing the air-media interface and allowing waste heat to evaporate at an accelerated rate.

The heat resistance is the main factor influencing the cooling efficiency for the cooling tower PVC fill. And the quality of the raw material used for producing cooling tower PVC fill will influence the cooling tower fill's service time. We always adapt the high quality cooling tower PVC fill for the cooling tower. 

Specification of CF marley cooling tower film fill : 

This fills has 2 types, type A and type B, installation method is hanging. 

The heat resistance is the main factor influencing the cooling efficiency for the cooling tower PVC fill. And the quality of the raw material used for producing cooling tower PVC fill will influence the cooling tower fill's service time. We always adapt the high quality cooling tower PVC fill for the cooling tower.

Each size fill specifications: 

Advantages for our PVC fill:

>> Good chemical stability

>> Anti-acid, anti-alkali

>> High cooling efficiency

>> Small ventilation resistance

>> Large cooling area

Application of film fill: 

The cooling tower fill is easy to been glue by PVC glue, and also easy to been installed in machanical draft cooling tower, natural draft cooling tower, round cooling tower and Air-condition cooling tower.

We can custom as your demands to produce for you, Welcome to your inquiry.